The operating voltage is available for other terminals as voltage supply via power terminals. Power connections are made automatically from module to module via the internal power jumper contacts when snapping the terminals together.
The power load of the power contacts must not permanently exceed 10 A.
When inserting a terminal without power jumper contacts or an additional power terminal the field supply fed through the power jumper contacts is interrupted.
If necessary, a new potential can be generated on the power jumper contacts by a power terminal (e. g. WAGO750-610 for 24 V DC, WAGO750-611 for 230 V AC).
Caution! |
|
|---|---|
 |
The length of the supply cable between the power source and the device must not be longer than 30 m. |
Other documentation |
|
|---|---|
 |
Regarding the power supply, please refer to the manufacturer’s original manual(s) for more information. |