Proceed as follows to install the device.
Danger of electric shock! |
|
|---|---|
 |
Before opening the device disconnect it from the mains and pull out the mains plug from the socket equipped with earthing contact! Never use the device with a damaged mains cable! |
Warning! |
|
|---|---|
 |
Connect the device to one supply voltage only according to specifications on the built-in power supply unit! Always use a socket equipped with earthing contact! Use a terminal strip with overvoltage protection or an uninterruptible power supply (UPS)! Connect the device only to earthed power networks (TN-networks according to VDE 0100 Part 300 or IEC 60364-3)! The operation via ungrounded networks or networks (IT networks) earthed via impedance is not permitted! Never put a damaged device into operation! |
Note |
|
|---|---|
 |
If you install the device into a 19" rack with rotating frame, consider the depth of the device. Observe the minimum bending radii of the cables. |
-
Place the device on the 19'' frame from the front.
-
Fasten the device to the 19'' frame with 4 screws.
-
Plug in the mains cable of the device into a socket.