Mounting

To mount the module ibaMS16xDO-2A , proceed as follows.

1. Disconnect the central unit from the power supply.

2. Remove the cover from the backplane bus onto which you want to attach the module.

3. Attach the module to the backplane bus and press it firmly against the module rack.

4. Screw the module to the top and bottom of the module rack using the fastening screws.

   Caution!
   	Always screw the device and the modules tightly. Plugging or unplugging the connectors for the inputs/outputs can otherwise cause damage.

5. Connect the grounding screw on the bottom of the housing to the protective ground / grounding shield.