Mounting

Proceed as follows to mount the ibaMS16xAI-10V, -10V-HI, -24V, -24V-HI, -20mA module.

1. Disconnect the central unit from the power supply.

2. Remove the cover from the backplane bus, to which the module should be attached.

3. Attach the module to the backplane bus and press it firmly against the module rack.

4. Screw the module to the top and bottom of the module rack using the fastening screws.

   Note
   	Always screw the device and the modules tightly. Plugging or unplugging the connectors for the inputs/outputs can otherwise cause damage.