For a number of devices, it is possible to transmit signals from ibaPDA to a device via the output channel. These output signals are primarily intended to signal events, or to trigger alarms or alerts. Analog values can also be output. The configuration is carried out in ibaPDA in the I/O Manager.

On the device side, you need a device that is suitable for processing output signals, e.g., ibaNet750-BM-D with WAGO output terminals or an ibaPADU-S-CM device with one or more output modules.

For ibaMAQS, you need an ibaM-FO-2IO module.

Below you will find a list of the modules that can be used for digital and analog outputs.

Interface module

Output modules

Comment

ibaM-FO-2IO

  • ibaPADU-S-CM

  • ibaPADU-S-IT-2x16

  • ibaPADU-S-IT-16

  • HAICMON CMU

  • ibaCMU-S

  • ibaPQU-S

  • ibaBM-DP

  • ibaBM-PN

  • ibaLink-io-embedded

  • ibaLink-VME

  • ibaNet750-BM-D

  • Generic Flex

Only available if the link is in 32Mbit Flex mode

Which output modules you can use depends not only on the devices used but also on the communication mode used at the FO link.

Most current devices, such as ibaBM-DP, only support the output function in 32Mbit Flex mode.

In pure 32Mbit mode, no output modules are available.