|
Digital input |
|
|
Number |
1 |
|
Design |
Galvanically isolated, protected against reverse polarity, single ended |
|
Input signal |
24 V DC |
|
Max. input voltage |
±60 V permanent |
|
Signal level log. 0 |
> -6 V; < +6 V |
|
Signal level log. 1 |
< -10 V; > +10 V |
|
Hysteresis |
none |
|
Input current |
1 mA, constant |
|
Debounce filter |
Optional, 4 operating modes |
|
Sampling rate |
max. 10 kHz, freely adjustable |
|
Electrical isolation |
|
|
Channel - system |
Functional isolation: 1 kV AC |
|
Connection technology |
2-pin socket, push-in, pitch 5 mm, conductor max. 1.5 mm2; information on conductor and stripping length see chapter Connection technology connector/terminals |
|
Additional function |
Shutdown |
|
Digital output |
|
|
Number |
1 |
|
Design |
Galvanically isolated, solid-state DC switch |
|
Switching voltage max. |
200 V DC; protection against surge voltages |
|
Switching current max. |
up to 350 mA (permanent), overcurrent protection |
|
Switching delay |
< 2 ms (at 100 mA) |
|
OFF resistance (log. 0) |
> 100 MΩ |
|
ON resistance (log. 1) |
< 3.75 Ω (at 100 mA) |
|
Electrical isolation |
|
|
Channel - system |
Functional isolation: 1 kV AC |
|
Connection technology |
2-pin socket, push-in, pitch 5 mm, conductor max. 1.5 mm2; information on conductor and stripping length see chapter Connection technology connector/terminals. |