Mounting
-
Lift the green lever upwards and place the device onto the rail.
-
Hold the device firmly and push the lever down again to lock the device onto the rail.
-
If no further modules are mounted, mount the end cover.
Connecting
-
Connect the Ethernet cable(s) to one of the network interfaces X4 or X51.
-
Connect the 24 V DC power supply with the correct polarity and switch on the device.
Dismounting
-
Shut down the processor module and switch off the power supply.
-
Remove all connections from the processor module.
-
Grasp the module at the top and bottom with one hand and lift the green lever upwards to release the lock on the DIN rail.
-
Pull the module forward.
-
Push down the green lever.