Most of the basic settings apply to the input and output module. The Calculation timebase and Minimum output timebase settings are only available for the output module.
Basic settings
Module type, Locked, Enabled, Name, Module No., Use name as prefix
see chapter ibaM-DAQ - General tab.
Calculation timebase
Timebase (in ms) used for the calculation of the output values.
The calculation timebase is not the same as the output timebase, with which the values are output. The calculation timebase is identical to the timebase of the input module.
Minimum output timebase (information only)
Timebase with which the outputs can be updated as quickly as possible. The output timebase results from the smallest common multiple of all module timebases or is at least 50 ms.