Reset to factory settings

The device can only be reset by a hardware reset on the device itself. The reset button is located on the side of the device; see chapter View.

Note
	When resetting to the factory settings, the device settings are reset, and the module configuration, including its owner, is deleted.

1. With the device switched off, press and hold down the reset button using a suitable object (such as a paper clip; maximum diameter 1.2 mm).

2. Switch the device on.

3. When the operating status indicator LED starts blinking rapidly, you can release the reset button.

When the rapid blinking stops, the device has been reset to its factory settings.

The device is ready for operation again when the operating status indicator is statically on.