-
Shut down the PC.
-
Unplug the mains power line and open the computer so you can reach the PCIe slots.
-
Carefully remove the card from its packaging. Use a grounding cable or discharge any electrostatic charge before taking the card. No wiring or jumpering is necessary.
-
Grab the card at the front plate and the rear upper corner. Do not touch the contacts.
-
Carefully plug the card into a free PCIe slot on the computer and fix it to the housing using the fixing screw.
-
If you install more than one card, connect them with a flat ribbon cable (sync cable).
-
Close the computer.
-
Plug in the power line and start the computer.