Operating status indicator (LEDs)
LEDs indicate the operational state of the card and fiber optic channels. When switching on, all LEDs light up briefly to prove their proper function.
|
LED |
Status |
Description |
|---|---|---|
|
Green |
off |
card without power or defective |
|
flashing |
normal operation |
|
|
Yellow |
off |
no connection, fiber optics not connected or PLUSCONTROL system switched off |
|
flashing |
connection to PLUSCONTROL system is OK, but system not ready |
|
|
on |
connection to PLUSCONTROL system is OK, system ready |
|
|
White |
off |
no data transfer |
|
on |
data transfer in progress |
|
|
Red |
off |
normal state, no error |
|
flashing |
running in FPGA factory rescue mode |
|
|
on |
hardware error (FPGA not configured) |
7 segment display
The 7 segment display shows the following information:
-
Horizontal segment: After switching on, until the initialization by ibaPDA is finished
-
Numbers 0 to 3: Ident number, card is initialized
The decimal point shows how the card is configured:
-
Always lights up: configured as internal interrupt master
-
Off: configured as interrupt slave
-
Flashing: configured as external interrupt master
Note |
|
|---|---|
 |
It is not allowed to configure the ibaFOB-PlusControl as external interrupt master. |