In the factory setting of the network interface, DHCP is active (position of rotary switch S1 = 1). Thus, an IP address is automatically assigned to ibaDAQ, as soon as the device is connected to a network with a DHCP server. If the IP configuration is successful, ibaDAQ can be accessed via the host name daq-<serial number>, e. g. daq000002.
If the network does not have a DHCP server, ibaDAQ can be set to fixed IP addresses via the rotary switch S1 position = 2:
Network interface X21: 192.168.1.1
Network interface X22: 192.168.1.2
See also Rotary switch S1.
Note |
|
|---|---|
 |
The first configuration with a fixed assigned IP address (S 1 = 2) should only be carried out by means of a point-to-point connection, in order to avoid IP address conflicts. |
Note |
|
|---|---|
|
In administrated network environments, it may occur that the device does not receive an IP address even if a DHCP server is available. This is usually due to the fact that unknown network devices are not allowed in the network for reasons of safety. In this case, please contact your IT department to obtain network approval for the device. |