Creating a new roller bearing

The following steps are required to create a user-specific roller bearing.

1. Open the plant configuration

2. Open the component library

3. Open the Bearing area

4. Clicking on the <+> button opens a wizard, which guides you through creating the bearing.

Note
	If you do not know the rollover frequencies but you do know the dimensions of the bearing, you can determine the rollover frequencies using the <Calculate bearing frequencies> button.

Displaying/filtering roller bearings (user-specific)

If you only want user-specific roller bearings to be displayed, the following steps are necessary.

1. Open the plant configuration

2. Open the component library

3. Open the Bearing area.

4. Click on the button with the filter symbol and filter by user-specific roller bearings

Editing roller bearings (user-specific)

The following steps are required to edit a user-specific roller bearing already created.

1. Open the plant configuration

2. Open the component library

3. Open the Bearing area.

4. Click on the filter button and filter by user-specific roller bearings

5. Use the mouse to select the relevant bearing, click on the small Edit icon and edit the entries

Deleting roller bearings (user-specific)

The following steps are required to delete a user-specific roller bearing.

1. Open the plant configuration

2. Open the component library

3. Open the Bearing area.

4. Click on the filter button and filter by user-specific roller bearings

5. Use the mouse to select the relevant bearing and click on the small Delete icon (trash can symbol)

Note
	If you delete a user-specific component that is used in the plant tree, an error message is generated. In this case, the component has to be removed from the plant tree first. You can then delete it from the function block library.