The Status tab displays important status information for the CMU.
The table contents depend on the CMU type and may be different.
The table below shows the status items of an ibaCMU-S as an example.
|
Key |
Value (example) |
|---|---|
|
Device name |
The name of the device, e.g. CMU-S-00062 |
|
SerialNumber |
The serial number can be found on the device type label. |
|
CMUId |
The CMUId is assigned by the database for each individual CMU. |
|
License Sensors Interface |
Specifies whether the sensor license is valid (valid/invalid). |
|
Version |
CMU version |
|
Firmware version |
CMU firmware version |
|
Last calculation |
Time of the last calculation |
|
Product name |
Name of the product |
|
Hardware type |
Short form of the hardware type, e.g. ic1 |
|
Assembly date |
Device production date |
|
Last application update |
Software release date |
|
Log level |
The log level is set in the CMU hardware configuration and is important for displaying events. Possible log levels: 1 ... Error 2 ... Warning 3 ... Info 4 ... Debug |
|
Sensor defects |
A list of the buffer indexes (BIs) containing a sensor defect is displayed here. |
|
Hard disk directory |
Path for the device file archive |
|
Total disk space |
Total space on the disk in MB |
|
Free disk space |
Free memory on the disk in MB |
|
Sampling rate |
The sampling rate |
|
IP address |
IP address of the CMU |
|
Subnet mask |
255.255.255.0 |
|
Default gateway |
Default gateway for the CMU |
|
Module name 1st slot, 2nd slot, ... |
Name of the module in the relevant slot |
|
Fiber optic |
Fiber optic connection status |
|
S1, S2 button |
Position of relevant rotary switch |
|
Configuration |
valid - Configuration is OK not valid - Error in the configuration |
|
SW configuration and plugged HW |
Shows whether the software configuration and the connected hardware are compatible |
|
conf.hardware creation time |
Creation time of the hardware configuration text file conf.hardware |
|
ibaCMC version in conf.hardware |
ibaCMC version in the hardware configuration text file |
|
conf.measuringcondition.xml creation time |
Creation time of the measuring condition configuration file |
|
ibaCMC version in conf.measuringcondition.xml |
ibaCMC version in the measuring condition configuration file |
|
Telegram 1, Telegram 2 |
Connection status of the telegrams (connected/not connected/disabled) |
|
License DAT file |
Shows whether the license for writing DAT files is valid. |
|
License DAT file no. channels |
Shows the number of valid channels for this license. |
|
License RTS |
Shows whether the license for the RTS (runtime system) is valid. |
|
Development version |
Version of the development environment |
|
RTS version |
Version of the RTS |
|
License application |
Shows whether the license for the application is valid |
|
License no. IEPE channels |
Number of licensed IEPE channels |
|
License no. AI channels |
Number of licensed analog inputs |
|
License no. DO channels |
Number of licensed digital outputs |
|
License ibaNet750 |
Shows whether the license for ibaNet750 is valid |
|
License virt. channels |
Shows whether the license for virtual channels is valid |