This Network page can only be accessed by the "admin" user.
This page shows both network adapters of the device:
Network interface: Ethernet
Describes the settings of the LAN interface X22.
Service interface: TCP/IP over USB
Describes the settings of the USB connection type X12.
|
(1) |
If selected, a DHCP server available in the network is used. |
|
(2) |
If selected, a fixed IP address is used. |
|
(3) |
The Subnet mask suitable for the network. |
|
(4) |
Specification of the Default Gateway. In case no gateway is used, enter “0.0.0.0”. |
|
(5) |
With the <Submit> button, the entries for the network interface "Ethernet" are stored in the device. |
|
(6) |
With the <Refresh> button, the display of the entries can be updated (e. g. relevant for DHCP). |
|
(7) |
Fixed IP address of the USB connection that cannot be changed. |
Note |
|
|---|---|
 |
Ask your network administrator for an IP address suitable for your network. The following IP addresses are not permitted:
For the IP address, the "standard IPv4 dotted-decimal format“ without a leading zero is used. If you have entered any leading zeros, they will be automatically eliminated as soon the IP address is being accepted. |
Tip |
|
|---|---|
 |
If you make incorrect entries, there is a risk that you will no longer have access after the restart. You can reset the network parameters together with the device settings to the factory settings. For further information, see chapter Push button S10 |