With 32Mbit Flex, output signals can be sent via an active slave configured on the device from ibaPDA to the DP master.

The slave has to be configured e. g. under Step7 with an appropriate input range, for the master can read the data from the slave. See also the example in chapter Operation as active slave.

For configuring the outputs, select the Outputs tab in the I/O Manager. Modules which have been configured on the input side (Inputs tab) are displayed here.

Note
	ibaPDA processes output signals with lower priority compared to the acquisition of input signals with a cycle not faster than 50 ms depending on the I/O configuration.