Procedure

1. Consider which factors and parameters could have an influence on the process with regard to the planned analysis.For example, wear detection for saw blades with ibaInCycle:

   • Material type of the material to be sawn

   • Saw blade diameter

2. Check whether the appropriate signals for mapping these factors are present in the I/O configuration. If not, create them. These can be analog, digital and/or text signals.

3. Define reasonable values or value ranges for these signals.For example, wear detection for saw blades with ibaInCycle:

   • 3 material types: 1, 2 and 3

   • Saw blade diameter: 100 … 300 mm

4. Add a Process condition module.

5. Create and configure a profile by entering the previously determined process variables in the Inputs table.

6. Select the desired profile in the general module settings.

7. Assign the signals to the now-visible input parameters in the general module settings.

8. To use the process condition, select the desired output signal for the Process condition module as the status signal in the module settings, e.g., for the InCycle Auto-Adapting module.