The signal tables for modules with dig512 format consist of two levels.
The first level shows the so-called connectors and activation attributes.
If you click on the small plus symbols in the table rows, the second level of the signal table opens and you can see the actual signals (16 per connector).
General columns in the signal table
For a description of the general signal table columns see Columns in tables with analog and digital signals.
Connector level
Connector
Following the principle of the former ibaDig512 device, the separate data packages are referred to as connectors. One connector corresponds to an integer data item with 16 bits.
With a mouse click on the small + (or -) symbol at the connector name you can extend or hide the signal tables for each connector. You may also enter a name for the connector in the "Connector" column. This name is used for engineering assignment. Under each connector, 16 digital signals are grouped on the second level of the signal table.
Drop number and register
Enter or dial the drop number and the register.
If you enter the drop number in the first row and then click on the column header, all following rows will be adjusted automatically.
Proceed analogously in the "Register" column, then the rows beneath will be filled with increments of 1.
The single bits will be addressed according to the 16 rows of each connector on the second level.