Description

The ibaFOB-PlusControl PC card is used for the connection from Siemens PLUSCONTROL systems to the ibaPDA data acquisition system. To do this, the ibaFOB-PlusControl card is connected to a PLUSCONTROL CP.

The connection supports a data transmission rate of 1 Gbit/s. Up to 400 analog or digital signals can be transmitted

The parameters are set completely by the software. Jumper and jumper settings are not required.
Interface configuration

As with the other ibaFOB cards, you should first select the card node in the interface tree in the I/O Manager.

The interrupt mode is set in the Configuration tab.

The interrupt mode is automatically determined by ibaPDA: "Slave mode” is set as soon as other iba cards are inserted. Only in the event that no other card types are inserted besides several ibaFOB PlusControl cards you can determine which of the cards has the "Internal interrupt master" mode and thus generates the interrupt for the other cards. The interrupt is transmitted via the synchronization line to the other iba-PCIe cards (interrupt slaves) (with the supplied flat ribbon cables).

Check "In use" if the card should be used by ibaPDA.
Test connection

Select the "Link" node of the card in the interface tree.

The link to the connected PLUSCONTROL system is established by clicking on the <Test connection> button in the Connection tab.
Available modules

  • PlusControl standard
Product name

ibaFOB-PlusControl (Art. no. 11.112602)