Basic settings
For a description of the basic settings see Common and general module settings.
The time base of the decoder module is always the same as the time base of the source signal.
Swap mode
Set the swap mode according to the signal source. You can choose between the following 4 options:
|
Mode |
32 bit |
|---|---|
|
No swap |
ABCD |
|
Depending on data type |
DCBA |
|
Swap 16 bit |
CDAB |
|
Swap 8 bit |
BADC |
The swap mode to be selected depends on the swap mode of the signal source.
Source signal
Select the source signal to be decoded from the signal tree.
Convert to integer
In case that the source signal is a floating point value, you can have the value converted into integer format.
If this option is enabled (TRUE), the floating point value is converted to integer format before the bits are extracted. Only the first 24 bits of the integer are valid.
If this option is enabled (TRUE) although the signal is already an integer, the format remains unchanged.