The device uses the following ports mainly for configuration and diagnostic purposes.
|
Interface |
Port / Port range |
Connection |
Protocol |
Configurable |
Remark |
|---|---|---|---|---|---|
|
Daytime |
13 |
inbound |
TCP/UDP |
no |
- |
|
ftp |
21 |
inbound |
TCP |
no |
- |
|
telnet |
23 |
inbound |
TCP |
no |
- |
|
Time |
37 |
inbound |
TCP/UDP |
no |
- |
|
Webinterface |
80 |
inbound |
TCP |
no |
- |
|
NetBios-NS |
137 |
inbound |
UDP |
no |
- |
|
NTP |
123 |
inbound |
TCP/UDP |
no |
IPv4: [IANA] 224.0.1.1 IPv6 1): [IANA] FF0x::101 |
|
PTP |
319 - 320 |
inbound |
TCP/UDP |
no |
IPv4: [IANA] 224.0.1.129 - 224.0.1.132 IPv6 1): [IANA] FF02::6BFF0x::181FF0x::182FF0x::183FF0x::184 |
|
Flex UDP Communication Port |
62012 |
inbound |
UDP |
yes |
- |
|
Device detection (Autodetect) |
62000 |
inbound |
TCP |
no |
- |
|
Configuration system properties |
62001 - 62002 |
inbound |
TCP |
no |
- |
|
Configuration |
62101 - 62104 |
inbound |
TCP |
no |
- |
|
Debug |
63000 63002 63101 |
inbound inbound inbound |
TCP TCP TCP |
no no no |
- - - |
1) These permanently assigned Multicast addresses are valid across all ranges. This is indicated by an "x" in the range field of the address, which means any valid range value.